Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$442.00
Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell, and all driveshell internals for a plug-and-play swap.
Micro Spline Driveshell Instructions
- Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX
- Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.
$406.00
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub.
- 187mm axle width
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$100.00
- Replacement freehub bodies include pawls and springs pre-installed
- M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg
- E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls
- HG 11sp road FH body
$81.80 - $99.99
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Included
$95.50
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
$95.00
Replacement freehub bodies for Vault hubs.
- Use to replace worn/damaged freehub body or to switch cassette standards.
- 60T
$92.40
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
$83.20
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- End Cap Sold Separately
$34.00 - $82.00
Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite.
Features
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$80.90
Maximum stiffness and highest safety—the RWS Quick Release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$80.90
Maximum stiffness and highest safety—the RWS Quick Release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$80.90
Maximum stiffness and highest safety—the RWS quick release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
$61.30 - $79.10
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
- Crafted from lightweight aluminum
- End Cap Sold Separately
- Weight: 39 g
$79.00
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Drive Side Axle End Cap
$77.00
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Right Axle End Cap
$72.00
Original equipment freehub bodies to fit SRAM hubs and wheels.
$72.00
Replacement freehub body for Sram 900 series hubs
$70.00
- Designed to stabilize 15g spokes in most hub flanges
- 1000-pack
$68.00
Get rolling again with a replacement freehub body for your Mavic wheels.
- Freehub for ITS-4 hubs. Also compatible with TS-2 hubs.
- Quick engagement 4 pawl design (pawls sold separately)
$65.00
Fully connected.
Connect with your ride. Integrated Cannondale wheel sensor, co-developed with Garmin, delivers hyper accurate speed, route and distance info, registers your bike, reminds you of needed service and more, all through the free Cannondale App.
Highlights:
- Captures essential ride data automatically
- Includes adapters for most wheel types
- Utilizes the Cannondale App for ultimate connectivity
$65.00
Shimano, FH-M828/788/678/648, Freehub body, Y3TH98050
$64.00
Who knew we could make a thru axle disappear? The new Maxle Stealth offers a light, low profile alternative to Maxle Lite.
- Hub OLD 20x110
- Length 158mm
- Thread Length 10mm
- Thread Pitch M20x1.50 - BoXXer C1 (2019+)
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
- Compatible with all 15mm forks
$64.00
Shimano Dura-Ace 9000 Hub Quick Release Skewer.
- Axle Type: Standard QR
$59.00
Maxle Ultimate Lever Assembly
- Fits Maxle Ultimate B1
- Includes lever section only
- Suitable for suspension forks
$56.69
The buyer's choice for wheel builders looking to save weight.
ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond.
- Weight: starting at 20g for 64 nipples
$56.00
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Speed Release dropouts
$56.00
Trainer ready.
Keep the ride going by putting your Cannondale on a trainer with the 2-in-1 trainer axle.
Where it thrives:
The open road, on the trainer
What it's built for:
Versatility, convenience
Highlights:
- Fit your Cannondale road bike to any indoor trainer Removable end caps for outdoor riding
- Compatible with Cannondale road bikes that utilize Syntace X-12 dropouts
$54.95
- E*thirteen freehub bodies feature 6 degree (60 Point) engagement
- Kits include freehub body, bearings, springs, and pawls
- SRAM XD-11 Freehub body converts all e*thirteen plus level hubs for use with SRAM XD-11 drivetrains
$53.19
Make it more aerodynamic – this nipple is hidden inside the rim.
DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface.
- Weight: 22g for 64 nipples
$52.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows to fully tighten the axle and to perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Removable, plug-in lever design is streamlined and protects your RWS lever
- Thread pitch: 12 x 1.5mm
- Length: 121mm
$52.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Conical X12 washer, compatible with Syntace X-12 system
- Removable, plug-in lever design is streamlined and protects your RWS lever
- Thread Pitch: 12 x 1.0mm
$52.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever.
- Ratcheting system tightens skewers with turns rather than a cam
- Lever can be rotated into an ideal position after tightening
- Removable, plug-in lever design is streamlined and protects your RWS lever
$23.99 - $52.79
Ease of use, lightweight, and optimum performance in a single product.
The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.
$50.00
Big Deal spoke nipple washers are not required for tubeless set up. When used, they eliminated the need for tubeless tape.
$50.00
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$50.00
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$50.00
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$49.00
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
$48.00
After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option.
Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes.
- Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles.
- Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design.
- Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength.
- Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal.
- Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$47.70
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
- DT Swiss 5mm QR Endcap Kit: for 1100 Dicut Front Wheels
Page 1 of 3
Next page