Parts

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables

- Aheadset preload adjusting bolt

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Stainless steel pedal washers - Sold in pairs

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Hoods with (FD) are Flight-Deck compatible

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5

Shifting cables for Road/Mountain bikes.

Replacement banjo bolt for Hayes hydraulic Brake systems.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Basics brake cables provide value on a budget. - Pre-stretched - double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

- Rubber - Color: Black

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.

Serfas Seat Clamp fits all Serfas' seats with standard rails. It's compatible with 7/8-inch diameter seatposts.

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Shimano Front Derailleur Cable Fixing Assembly

- QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut