Mountain Frames
$3,799.00
When the trail beckons you to traverse above tree line and into unmarked territory, the Joplin is ready to take you there. With its 120mm of VPP™ travel and 29-inch wheels, it’s the ultimate climbing partner to help you reach any summit. And when it’s time to point downhill, its head tube angle and slack geo will navigate the most rocky terrain. Whether you’re out on a solo adventure or a soul-lifting ride with friends, the Joplin will let you soar to new heights.
$3,899.00
Whether blind racing or just blindly enjoying the trails as they come, the Roubion’s MX wheel combo feels like the best mix since Aperol met spritz. A 29-inch front wheel serves up high-speed stability and high rolling confidence. Meanwhile, the 27.5-inch rear wheel makes for an intuitive and highly maneuverable rear end that loves to get sideways around the most ragged of switchbacks. We’re pretty sure there’s no better bike to tackle alpine terrain.
$3,449.00
Saving weight means little without retaining an appropriate level of stiffness and responsiveness too. So we’ve taken all the acceleration and out-of-the-saddle sprint qualities of a carbon XC race rocket and fused them with a rear-end that still rails corners like a hardcore trail bike.
This unique XC-trail attitude is also reflected in the geometry. The head tube angle (67.1 degree) and reach (425mm) is a little steeper and shorter than a Joplin to meet the demands of aggressive climbing, yet the Wilder’s seat tube angle is a touch slacker and the chainstays a little longer than a Joplin too in order to retain that familiar Juliana confidence on descents. And talking of chainstays, each chainstay length is specific to the individual frame size; meaning riders of every height enjoy the same handling and performance no matter what.
Beyond the details, there are some bigger features that amplify this XC wild child’s abilities. Rapid rolling 29-inch wheels are paired with a 120mm fork to tame the feral lines and smooth the sketchiest of passing maneuvers. There’s even room for two water bottles within the front triangle for bigger training and racing days.
$4,499.00
The Exie USA is a World-Cup capable cross-country race bike that flat out shreds. With a sub 2,000g frame weight and dw-link suspension, it offers a stunning combination of pedaling efficiency and downhill performance. We designed, built, and tested it in our Santa Cruz factory, which is powered by the warm California sunshine.
RACE PROVEN
Jenny Rissveds won the 2023 Lenzerheide XCC World Cup Cross Country Event on the Ibis Exie, a bike we quite literally made in our own backyard here in Northern California!
BUILT BY US
We build each Exie USA in our Northern California factory. This gives us the utmost control, which enables us to hit remarkable frame strength, stiffness, and weight targets for this frame.
SIZE SPECIFIC SEAT ANGLES
Whether you're racing short track or on a multi day epic, the Exie's seat tube angles allows you to harness your strongest muscles, while reducing any potential knee or wrist strain. We've also steepened the seat tube angles as the frames get larger, to allow riders with different inseams to achieve the same riding positions.
DW-LINK SUSPENSION
Don't squander a single watt. Our dw-link suspension platform offers incredible climbing efficiency and traction along with plush, downhill-crushing goodness.
RIDE MORE, WRENCH LESS
We use bushings where it makes sense and bearings where it doesn't. The IGUS bushings in our lower link are lighter, stiffer, and virtually maintenance free. We've also added features like a threaded bottom bracket to help make any future maintenance easy.
INTERNAL CABLE ROUTING
Internal cable routing doesn't have to be a pain. We've added internal tubes to our tubes, no picksets, flashlights, or swear words required.
2.4" TIRE CLEARANCE
You can run overbuilt, chunky tires; you can run light, big volume fast tires, but whatever you run, you're not limited by width.
2X BOTTLE CLEARANCE
The Exie USA has clearance for two water bottles inside the front triangle on every size frame.
INTEGRATED CHAIN GUIDE
Drop the hammer, not your chain.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$3,899.00
Introducing the HD6, the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
GEOMETRY
The 29" front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5" rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64-degree head tube angle (one-degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5" rear wheel), the bike maintains an equilibrium between agility and stability.
FIVE SIZES
In order to place every size rider in the same position over the rear wheel, the HD's seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
COIL COMPATIBLE
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
DW-LINK
The suspension layout may be new, but it's still DW-Link. The inherent efficiency means you don't need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
TRACTION TUNE
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops.
BUSHINGS
Tired of buying bearings each season? So were we. That's why we've strategically employed bushings where they're most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they're virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
LIGHTWEIGHT PREMIUM CARBON
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance, no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
INTERNAL CABLE ROUTING
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out a beautiful moment indeed.
PROTECT YOUR INVESTMENT
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
LIFETIME WARRANTY
If it's our fault, we'll fix it. Simple as that.
$2,774.00
$3,699.00
25% Off
What if we took everybody’s favorite bike and made it a little slacker and little longer? Hell, what if we made it more progressive and coil compatible? And that’s exactly what we did for the Ripmo V2S. Active ingredients include: 29” wheels, berm-defying cornering tendencies, and a love for long rides.
$3,300.00
HIGHLIGHTS
Engineered with a full composite frame, this 29er has 100mm of rear suspension travel. The linkage-driven, single-pivot FlexPoint Pro rear suspension makes room for shorter chainstays to improve climbing capabilities and overall agility. Other updates include new 29er-specific XC race geometry with a longer reach and a slacker headtube angle plus a new design for internal cable routing.
ADVANCED COMPOSITE
High-performance grade raw carbon material is used to produce this custom frame material in our own composite factory. The mainframe and rear swingarm are handcrafted with monocoque construction for optimized stiffness-to-weight and an ultra-responsive ride quality.
FLEXPOINT PRO SUSPENSION
Developed as superlight rear suspension for XC bikes that demand efficiency, control and responsive handling, this linkage-driven, single-pivot system delivers 100mm of rear-wheel travel. It's engineered with a full-composite swingarm to minimize frame weight.
XC RACE GEOMETRY
The superlight composite frame is optimized for efficiency and control with an updated 67.5-degree head tube angle, longer reach, and a 110mm suspension fork for fast, technical XC performance.
OVERDRIVE
Giant's proven oversized fork steerer tube technology. Designed to provide precise front-end steering performance, the system's oversized headset bearings (1 1/2" lower and 1 1/8" upper) and tapered steerer tube work in conjunction to provide optimal steering stiffness.
ADVANCED FORGED COMPOSITE
A state-of-the-art high-pressure molding process is used to produce the composite rocker arm, making it lighter, stiffer and stronger than aluminum.
POWERCORE
A massively oversized bottom bracket/chainstay area features a fully integrated, 92mm bottom bracket design. Asymmetric chainstays provide additional stiffness on the driveside and stability on the non-driveside.
INTEGRATED CABLE PORTS
New design for internal cable routing offers a clean look and performance for derailleur, brake, and dropper post cables and housing.
Previous page
Page 2 of 2