Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

Chris King XD Driveshell
$285.00
Chris King ISO XD Driveshell assembly, complete with bearings.
Whisky Parts Co. No. 9 Carbon 50d 700c Rim
$450.00
Whisky's No.9 50d rims are designed to a be a lightweight, aero, stable starting point to build exquisite wheels. They offer an aero advantage over the 30d rims, while offering a stiffer, more robust platform. Fit for long days in the saddle, cutting through the wind and hammering finish line sprints, they’re a perfect all-rounder. These disc brake-specific rims offer clean design and aesthetics. Featuring a wide inner width, they pair well with a variety of tires across the full range of drop bar pursuits. As with all rims Whisky makes, these come with tubeless valves and required tape in the box. - Designed to be used with spoke nipple washers - Rider weight limit: 300lbs
Giant SLR 1 42mm Carbon CenterLock Disc Road Wheels 700c Rear
$798.00
Made with ultralight composite rims, this pro-level mid-profile aero disc WheelSystem is a great all-around weapon for sprinting to the podium or a solo attack on a ride in the mountains. The SLR 1 42 Disc is a fine balance between efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 42mm deep full-composite disc brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 21H Front & 24H Rear - Alloy locking nipples - Giant alloy hub shell, Centerlock Disc rotor mount and pawl based driver system - Includes end caps for the following configurations: - Rear: 142x12mm T/A & 130x5mm QR - 1580g per pair
Zipp Tangente Tube Wrench
$7.00
Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender
Giant SLR 1 30mm Carbon Climbing Road Wheels 700c Rear
$735.00
Power up climbs. Descend with speed and confidence. Stiff, superlight, and built with proprietary technologies, the SLR 1 30 delivers efficiency, control and durability in a stiff, lightweight and value-oriented package. Features - Ultralight 30mm deep full-composite rim brake only rims - Tubeless compatible using supplied rim strips and valves - 17mm internal rim width for optimal tire performance - Dynamic Balance Lacing technology for enhanced drive efficiency and braking control - Sapim straight-pull bladed stainless spokes- 16H Front & 21H Rear - Alloy locking nipples - Giant alloy hub shell, with pawl based driver system - 1380g per pair
Whisky Parts Co. Tubeless Conversion Rim Tape Kits
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Problem Solvers Axle Nut
$2.50
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
SRAM MTH 746 Rear Hub
$92.00 - $109.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.
SRAM 746 Rear Disc Hub
$125.00 - $143.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
Problem Solvers Thru-Axle/QR Adaptor
$19.99
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061
Stan's NoTubes Crest S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Stan's NoTubes Baron MK3 29-inch Rim
$115.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra low profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. - Maximum stability and control with 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Patented bead socket tubeless technology means less rolling resistance and improved handling with high volume tires - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80"-3.20" Trail tires
Chris King ISO QR Rear Hub
$460.00
Make Chris King's ISO Rear Hub the first and final choice for your bomb-proof, any trail, anywhere wheels. This quick-release rear hub is the fast-rolling, high-mileage piece of gear that your bike has been waiting for. The large diameter hub shell uses Chris King's made-in-house stainless-steel bearings for unbeatable strength and durability, and the freehub offers near-instantaneous pedal engagement. Six-bolt rotor compatibility keeps setup and parts choices simple so you can spend more time riding. And, this hub is compatible with either 10mm or 142 x 12mm replacement axles (sold separately). - Drilling: 32h - Rotor type: 6-bolt
Shimano Deore XT M756A 10-Speed 6-Bolt Disc Rear Hub
$62.00
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
DT Swiss Champion 14g Silver Spokes
$52.40
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately
Stan's NoTubes ZTR Crest Rim
$85.00 - $90.00
Thicker walls plus extremely low weight make Stan's ZTR Crest rim a stiff, light race rim for riders that like to go hard. The Crest also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.
ENVE Brass Replacement Spoke Nipple
$1.00 - $16.64
ENVE brass replacement nipples fit perfectly into their molded spoke hole carbon fiber wheel systems.
DT Swiss EX 1501 Spline ONE 30 27.5-inch Front
$534.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
WTB Asym TCS Rim 29-inch
$89.95
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
DT Swiss M 1900 SPLINE 25 29-inch Rear
$253.90 - $291.90
Listen up all you seasoned all mountain riders out there, with your grazed calves and elbows! This wheel's for you. The lightweight M 1900 SPLINE 25 can withstand the toughest alpine trails. Its tubeless-ready rim has been tested by both professional mountain bikers on the trail and our experts in the lab. We've packed more than 20 years of expertise into the lightweight straight-pull hub to ensure that you'll be tearing up the trails for years to come with your M 1900 SPLINE wheels.
Surly Ultra New Disc Front Hub
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Ultra New Front Hub
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Ultra New Rear Hub (135mm)
$70.00 - $75.00
Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.
Wheelsmith Double Butted 14/15/14g (Black) Spoke
$70.00
- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50
Shimano Deore 6-Bolt Disc Brake Front Hub
$27.99
The Shimano HB-M525A hub is ideal for use with 6-bolt disc brake rotors and quick release dropouts. - Double contact sealing - Super polished bearing races for low friction rolling - 6-bolt ISO disc mounting surface
DT Swiss PRC 1400 Spline 35 Disc Brake Front
$1,036.90
Unsure what will happen on your group ride? Mountains, hills or flat sections? Water from below, water from above? You needn't worry, the PRC 1400 SPLINE 35 has it covered. high-end, bladed straightpull spokes and the most reliable and light-weight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip and lightweight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them. Equipped with disc brakes it will stop on a dime all the time. So the PRC 1400 SPLINE 35 is ready for anything, are you?
Surly My Other Brother Darryl
$150.00 - $155.00
My Other Brother Darryl is a single-wall constructed, 80mm wide rim. 80mm wide rims give you a bigger footprint than that of narrower rims, which means more floatation and more traction. To initiate tubeless sequence, you just need a no-stretch rim strip and bead-to-bead tubeless rim tape. My Other Brother Darryl comes with either a 32 hole, symmetric wheel lacing spoke hole pattern or the tried and true 64 dual spoke hole pattern that allows for symmetric or offset wheelbuilds. It's got plenty of cutouts to keep the weight down and help your tires float through the squishiest of terrain. - Wheel Size: 26 - Hub Compatibility: 32h - ETRTO*: 559mm - Weight: 710g (Symmetric) 740g (Dual) - Color: Black or polished silver *Tire bead seat diameter.
Stan's NoTubes Sentry S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
DT Swiss HG 1800 SPLINE 25 650B Front
$227.90
The HG 1800 SPLINE 25 combines Swiss precision and noble reserve. On closer inspection of the reliable e-specific components, it is clear that this wheelset won't let you down. Reinforced spokes, e-bike-specific hub components, and a super-durable rim make for a high-quality wheelset at an attractive price point.
DT Swiss HEC 1400 SPLINE 62 Front
$1,068.90
The HEC 1400 SPLINE 62 is the ultimate e-road bike wheelset with a true racing character and outstanding aerodynamic performance. Specifically developed e-bike components, ensuring a long-lasting and trouble-free ride, this wheelset offers the speed needed when you want to fall-in with the young guns keeping the pace high on your group ride. And let's be honest, the visual appearance of the HEC 1400 SPLINE 62 turns every e-road bike into a head-turner.
Page 1 of 25 Next page