With its aluminum construction, 4-bolt faceplate and sleek design, Giant's Alloy Stem is a great way to add lightweight strength and a custom fit to your ride.
$30.00 - $35.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
- Adjustable angle from 0 to +45 degrees - 2 bolt removable faceplate for easy adjustability/assembly
Giant's Adjustable Angle Stem gives you the custom fit. The 31.8mm handlebar diameter works nicely with modern bars. Place your handlebars high for upright, easy-riding comfort, or go low for a more forward, aggressive position.
• 3D forged 6061 aluminum body with oversize box cross-section • ± 8° requires fewer spacers • 46mm wide 6061 aluminum faceplate • Steel hardware
- Steerer Diameter: 1" or 1-1/8" (includes shim) - Length: 70, 90, 110mm - Bar Clamp: 25.4 or 31.8 (includes shim) - Angle: +/- 35 degrees - Material: 6061 Aluminum - Shot-peen finish
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
The Guide Trail Stem is lightweight, durable, and provides excellent steering response. Available in super short lengths for use on new-school trail bikes with wide bars, short rear ends, and long front-center geometry. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - Bead-blasted, then anodized, finish
$40.00 - $45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
$49.99 - $60.00
Ritchey's 4Axis Stem is crafted from 6061 aluminum for light weight and durability. It works with aluminum and carbon steerers thanks to the angled clamp design. And, the 4-bolt clamping system holds fast and works great with aluminum and carbon bars.
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
Ritchey's Pro stem offers professional caliber features at a real-world racer price. - 3D net forged 6061 aluminum - +/- 30 degree stem angle - Angled steer tube clamp slot reduces stress on carbon steer tubes - Material: 3D net forged 6061 - Lengths: 60 - 120mm - Angle: +/-30 degree - Steerer Height: 45mm - Steerer: 1-1/8" - Faceplate Width: 40mm - BB Black finish - 155g (110mm)
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Based on our famous Crystal stem, the Radio Axis stem is CNC machined out of the highest quality 6061-T6 alloy, lifts your bars nice and high, and prevents them from slipping due to our wider 48mm clamping area and the larger head 6mm bolts. The choice of most of our team, this beauty now comes in a wild Sandblasted Purple finish.
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)
$79.99 - $90.00
FSA's OS-150 Stem is a worthy upgrade for your favorite bike. It's made of forged and CNC-machined aluminum, so it's light, durable and strong enough for any road or mountain riding adventure. Plus, the OS-150 comes with a carbon fiber faceplate for light and strong handlebar clamping security.
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
$89.95 - $90.00
Tom Ritchey's original 4Axis stem changed stem design forever, and the WCS 4Axis Road Stem has all the original features updated to add a touch of class for your speed machine. It's made of forged 2014 aluminum for super light weight with excellent stiffness for optimum handling. Plus, it features Ritchey's Bias Clamp and 4-bolt faceplate, which make it super secure. It looks great, too.
- Durable, lightweight forged 6061 aluminum construction - 52mm wide clamp for added stiffness - Adjustable reach (40 or 50mm) - 0° rise for long-travel bikes - Compatible with: 2005+ Rockshox Boxxer, Fox 40, and Manitou Dorado forks (each sold separately)
• 3D forged 2014 aluminum alloy with oversized box cross-section • Oversized 46mm wide 6061 alloy faceplate • Titanium hardware • ± 8° rise requires fewer spacers • 1-1/8" steerer adapter included • Weight: 145 grams (100mm)
With its tough, forged aluminum construction, 4-bolt face-plate, and 52mm-wide clamp Giant's Contact DH Stem is lightweight strength and true DH durability. It offers point-and-shoot steering precision and adjustable reach so you can rally every track.
With its 3D-forged aluminum construction, 4-bolt faceplate, and titanium hardware, Giant's Contact OD2 Stem is a great way to add lightweight strength and a custom fit to your ride. The oversize box cross-section gives you stiffness that you can feel when you really torque on the bars. The recessed top cap and integrated upper spacer give you a clean, streamlined look that increases the steerer interface for a super solid front end. This stem is compatible with Giant's OverDrive 2 1-1/4-inch fork steerers as well as standard 1-1/8-inch steerers.
- Shimano PRO Puzzleclamp faceplate design - Triangular body for optimized weight to rigidity ratio - 7075 series aluminum construction - Lengths: 80-130mm - Angle: +/- 10° - Handlebar clamp diameter: 31.8mm - Suitable for 1-1/8” forks - Color: SB Black - Weight: from 120g
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
- Stiff, ultra-light, full-composite oversize box-section increases torsional stiffness with tuned vertical compliance - 46mm wide alloy faceplate - Titanium hardware - Recessed top cap and semi-integrated spacer maximizes stem to steerer contact - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
Page 1 of 2 Next page