"RACE BRED" IT'S NOT JUST A SLOGAN PRINTED ON THE SB150 TOP TUBE. WE'VE BEEN PINNING ON NUMBERS AND PINNING THE THROTTLE SINCE 1985.
The simple truth is, the SB150 has won more race stages it has started than any other EWS race bike in history.
For some, generating and maintaining speed is an elusive pursuit. When racing against the clock, our curve keeps racers skipping across the top of obstacles with the confidence of knowing there's more travel available, should they need it. A straighter, more linear progression curve means it's easier to tune shocks to pair with the suspension kinematics, and we don't have to rely on damping circuits to compensate. Being able to manipulate the leverage rate without affecting the anti-squat characteristics is unique to our patented Switch Infinity suspension.
TUNABLE FOR STAGE DECIMATING PERFORMANCE
Richie Rude wins running the same suspension design that comes stock on the SB150. No team only linkage or mods to his Switch Infinity. As personal performance elevates, racers are able to tune the SB150 to carry more and more speed – right up to the top of the box.
Across our line, we have chosen a relatively flat and high anti-squat curve in the beginning and mid-section of travel where pedaling commonly occurs a.k.a. the pedaling zone. This creates an efficient pedaling platform through your entire pedaling zone, as opposed to one single point. After the pedaling zone, there is an inflection point where the Switch Infinity link moves down, dropping the anti-squat drastically. Riders are typically not pedaling in this zone, so chain forces have less of an effect on the suspension's performance. Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts making the feel of a Yeti distinct.
FORWARD BIAS POSTURE
Gives racers the room they need, and centers them on the bike.
20MM LONGER TRAVEL FORK
Pairs well with our forward-biased frame matching the vertical wheel travel of the rear suspension.
Lower bottom bracket, and longer wheelbase.
TESTED TO DH STANDARDS
High-impact strength, carbon lay-up tuned to go fast and tested to DH standards.
|A||SEAT TUBE LENGTH (mm)||380||410||450||495|
|B||TOPTUBE LENGTH (mm)||571.9||602.4||625.6||653.9|
|E||CHAINSTAY LENGTH (mm)||433||433||433||433|
|G||ESTIMATED BB HEIGHT (mm)||347.8||347.8||347.9||347.9|
|I||HEADTUBE LENGTH (mm)||95||96.6||107.7||118.8|
|J||AXLE TO CROWN (mm)||577.1||577.1||577.1||577.1|
|N||FRONT CENTER (mm)||759.5||790.2||815||844.7|
|SMALL||155 cm - 170 cm|
|MEDIUM||165 cm - 180 cm|
|LARGE||178 cm - 191 cm|
|X-LARGE||185 cm - 201 cm|
|Frame||C/Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.|
|Fork||FOX PERFORMANCE 38/170MM|
|Rear Shock||FOX PERFORMANCE FLOAT X2|
|Wheels||DT SWISS E1900 30MM *Orders may ship with DT SWISS E532 30MM|
Front: MAXXIS ASSEGAI 2.5 EXO+
Rear: MAXXIS MINION DHR II 2.4 EXO+
|Bottom Bracket||SHIMANO XT BB92|
|Crankset||SHIMANO XT 30T 170MM|
|Rear Derailleur||SHIMANO XT|
|Cassette/Freewheel||SHIMANO XT 10-51|
|Brakes||SHIMANO XT 4 PISTON|
|Rotors||SHIMANO 203/SHIMANO 203|
|Handlebars||RACE FACE AEFFECT R 35X780MM|
|Tape/Grips||ODI ELITE PRO|
|Stem||RACE FACE RIDE 35X50MM|
|Headset||CANE CREEK 40 INTEGRATED|
|Seatpost||FOX TRANSFER 31.6MM / SM: 125MM, MD: 150MM, LG/XL: 175MM|
* Subject to change without notice.
|Moss / Small||B22150CSMPMOP2C158700|
|Moss / Medium||B22150CMDPMOP2C158700||210000045480|
|Moss / Large||B22150CLGPMOP2C158700|
|Moss / X-Large||B22150CXLPMOP2C158700|
|Turquoise / Small||B22150CSMPTUP2C158700|
|Turquoise / Medium||B22150CMDPTUP2C158700|
|Turquoise / Large||B22150CLGPTUP2C158700|
|Turquoise / X-Large||B22150CXLPTUP2C158700|
|Raw Carbon / Small||B22150CSMRGDP2C158700|
|Raw Carbon / Medium||B22150CMDRGDP2C158700|
|Raw Carbon / Large||B22150CLGRGDP2C158700|
|Raw Carbon / X-Large||B22150CXLRGDP2C158700|