Filter By:
- Bar Ends (1)
- Bottom Brackets (29)
- Brakes/Levers/Pads (74)
- Cables (35)
- Cassettes/Freewheels (21)
- Chainrings (33)
- Chains (28)
- Cranksets (15)
- Show More Categories
- Derailleurs (25)
- Forks (2)
- Groups (1)
- Handlebar Grips/Tape (38)
- Handlebars (15)
- Headsets (12)
- Pedals (37)
- Saddles (30)
- Seatposts (11)
- Shift/Brake Combinations (4)
- Shifters (12)
- Stems (17)
- Other (198)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$32.00
Answer's Alumilite handlebars provide ample width and rise to fit a 25.4mm stem clamp size.
- Weight: 325g
- Upsweep: 4°
- Backsweep: 8°
$22.95
Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.
$18.00 - $26.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$20.00 - $56.00
Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.
$24.00 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$25.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$26.00 - $34.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$31.00 - $37.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$62.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with short cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Short Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No
- Weight: 204 g
$350.00 - $410.00
3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family.
Noteworthy updates of the REVIVE 2.0 include:
- One piece 3D-forged upper tube unit for improved stiffness and strength
- Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance
- CNC-finished actuation lever for even smoother engagement
- New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation
Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike?
BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off.
Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before.
To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced.
That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of.
The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play:
- Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand.
- This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike.
So, now one might already understand that:
- No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings.
- No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design
- The hydraulic system can be reset to “new” via the unique “REVIVE-valving”
- This means the hydraulic circuit is a very stable closed system and basically maintenance free.
Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability:
- Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play.
- Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes.
1 set REVIVE dropper post includes:
- 1x REVIVE Seatpost
- 1x cable housing 1500mm
- 1x inner wire 1700mm
- 2x housing endcap
- 1x barrel cable clamp
- 1x air valve adapter
- 1x Quick-Reset-Lever
- 1x remote (optional)
- 1x BikeYoke I-spec adapter or Splits Clamp (optional)
- 1 set titanium saddle bolts and nuts (optional)
$120.00 - $130.00
The Cambium C17 All Weather is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride,” thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
$130.00
The Cambium All Weather C17 is made for years of hard riding in an angled riding position, for commuting in the city or travelling the globe. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is "ready to ride," thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass-reinforced back plate has loops for a saddle bag or other accessory.
Materials
- Vulcanized natural rubber And nylon top
- Steel rails with a reinforced plastic backplate
- Made in Italy
Specifications
- Length: 283mm
- Width: 164mm
- Height: 52mm
- Weight: 464g
$130.00
The Cambium C17 All Weather Carved is made for years of hard riding in an angled riding position, and features a hole for pressure relief and additional flex, eliminating contact points which cause discomfort for some riders. With the same contemporary design of the Brooks Cambium range, the All Weather is a durable and comfortable saddle that is “ready to ride”, thanks to a vulcanized natural rubber top for flexible performance requiring no breaking in period. From freezing rain to blazing sunshine, the waterproof, weatherproof nylon cover is made to perform flawlessly in all conditions. Additionally the updated fiberglass reinforced back plate has loops for a saddle bag or other accessory.
$46.45
Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission.
- Delivers extremely high performance levels and durability over time
- Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components
- Solid pins are aligned with the external surface for smoothness and precision
- 5.15mm width is designed to produce faster and lighter shifting
Specifications:
- Links: 110
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Drivetrain Speeds: 12
- Weight: 241g
$70.00
Campagnolo's Record 11-Speed Chain is the right choice for Campagnolo 11-speed drivetrains. This fine chain is engineered for excellent strength, long wear and brilliant shifting thanks to a unidirectional design and an anti-friction treatment that lets it glide across your cassette. It also boasts hollow pins to keep your bicycle as light as possible.
$6.00
Replacement bushings for Cane Creek shocks.
$9.00 - $13.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction
$9.50 - $15.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$10.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive.
- Spacers can be cut to fine-tune spring curve
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values.
- Bearings not included
- Stack height: 9mm
$21.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$24.00 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$29.00
Offer the perfect solution for adventure cyclists, e-bike riders, commuters, and mountain bikers who desire more comfort, more control, and more options.
- Comfortable Ergonomic shape
- Lock-on style bar end for 7/8" (22.2mm) handlebar
- 179g per pair
$29.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
$29.99 - $35.99
With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind.
- 7075 Aluminum thread ring
- 7075 Aluminum preload spacer adjuster
- Grade 5 Titanium 2.5mm hex fastening bolt
- Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
$48.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 5 mm
• S.H.I.S Lower: ZS44
• S.H.I.S Upper: ZS44
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 10 mm
• Weight: 130 g
$62.00 - $65.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$115.99 - $125.99
The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance.
- 440C stainless steel bearings, dual lip seal, marine grease
- Machined aluminum cups
Page 1 of 21
Next page