Packs/Racks/Baskets

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Timberjack Kids Framepack is the ultimate place for your young adventure junkie to stash their stuff. Whether filled with gear or treasures, this pack is the perfect compliment to every young heart’s desire to explore. - Constructed of rugged 600D PU coated Poly fabric, with Velcro strap attachments for a secure fit - Non-zipper bag opening uses Velcro closure with glove-friendly tab for easy access - Designed specifically to fit the Salsa Timberjack 24 kids bikes

Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.

The Egress Pocket is a waterproof, seam-welded, roll-top handlebar bag. It integrates with the Sweetroll and Harness, or can be used standalone on the handlebars with the included strap kit. The side profile of the Egress is curved slightly to contour around the main drybag so the bags nest well when the straps are tightened. This bag was built with the distance traveler in mind. It features a removable padded liner, giving you the option to protect electronics when the bag is removed and dropped at camp. The liner also features a small zippered pocket. On the outside, the Egress has a small carry handle and D-rings to attach a minimalist shoulder strap (included), making it a versatile travel companion. A jacket or extra layer can then be stored in the straps that typically attach it to the Sweetroll & Harness. Lastly, you can even run your belt through a series of webbing slots turning it into a hip pack. The webbing and hook closure with high-cycle-life Velcro make for a secure and durable closure. Features: - Waterproof - Contoured sides - Roll top closure with hook strap - Removable padded liner - Small zippered pocket in removable liner - Stand alone mounting and off bike versatility - Size: 3" depth 9.5" width 7-8" height - Weight: 10.0 oz complete, 7.5 oz without extra straps and liner removed. - Volume: 175 cu in approx. - Materials: 210 Denier Ripstop Nylon double side laminated with TPU Hypalon reinforcements

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

The Mountain Feedbag is an on-the-go aid station for endurance riding. It offers ample food storage with fumble-free, one-handed access via an innovative drawcord system. Slightly larger than the previous version, you can now easily fit your beloved 1L Nalgene bottle, camera lenses, and more. It also features an additional outside pocket, leaving you with more space for wrappers, sunscreen, granola bars, and other small items. Mountain Feedbags also work well as bike-mounted lens cases for mirrorless camera systems. Features: - Super-fast, one-handed (really!) opening and closure with no fumbling to grab cord locks - Three external pockets for gels and trash - Three-layer construction: outer fabric, foam, and liner. Foam adds stiffness and insulates. - Bright yellow interior liner snaps in place and is easily flipped for cleaning - Mounts to either side of stem with adjustable attachment points - run two for tons of storage - Easily used in combination with a Sweetroll or Harness handlebar system - Fits bike water bottles, Nalgene bottles, and bear spray cans - Weight: 3.7oz - Materials: Revelate exclusive VX 21 polyurethane coated X-pac; 420 denier yellow lining - Made in the USA with domestic and imported materials

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

The Legendary Tangle frame bag is the original half frame bag, it offers substantial cargo capacity in a sleek, rectangular shape that fills unused space on your bike. Designed to fit a variety of bike frames, these bags can be used for everyday riding, commuting, and adventuring. Stash your food, tools, and a mini pump and you're ready to go anywhere. Features: - Zipstretch construction - Pairs a bomber, wetsuit style molded-tooth zipper with Revelate's exclusive stretch Cordura panels that reduce zipper stress when closing bag - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers organizes small items - Urethane-coated webbing attachments won't absorb water or grit - Daisy chain front top tube attachment accommodates any top tube bag configuration - Padded with closed cell foam along all tube sections - Internal pump straps along top tube - Low-profile cam-lock buckles - Made in the USA with domestic and imported materials Sizing: - Small: top length 17.5", overall height 4" - Medium: top length 19.75", overall height 4.5" - Large: top length 21", overall height 6.5" To check that the Tangle leaves room for water bottle mounts, measure the vertical height from the bottle top to the bike’s top tube and compare to the the listed bag height. A little bit of overlap is ok, side-entrance water bottle cages are preferable. Specifications: - Materials: VX21 X-pac, 1050-denier domestic ballistics nylon, 420-denier diamond ripstop lining, closed cell foam padded tube sections

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

If your preference is for an off-the-back hydration solution instead of an over-the-shoulder pack, the Seral lumbar pack is for you. There are a lot of luxuries we can go without on a mountain bike ride, but water isn't one of them. The Seral lumbar pack is designed to carry an included 1.5-liter lumbar reservoir with a magnetic bite valve that attaches to the hipbelt for easy access while you pedal. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. Some lumbar packs have a tendency to creep around while you ride—we promise this one won't. A zippered main compartment is big enough for a spare tube, patch kit, mini pump, tire lever, and multi-tool, while hipbelt pockets can store your keys, sunscreen, phone, and trail snacks. LUMBAR CARRY - For riders who require hydration, but prefer the off-the-back carry and minimalism provided by lumbar packs. RIDE STABILITY - Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. INCLUDED RESERVOIR (SERAL) - A dedicated hydration compartment stores an included 1.5L lumbar reservoir and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. FEATURES - AirScape backpanel with countoring lumbar wrap provides maximum stablity - Included Osprey Hydraulics 1.5L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Easily accessible zippered main compartment with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment AIRSCAPE LUMBAR BACKPANEL - Extra thick ridged foam with center air channel for excellent ventilation HIPBELT - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Mounting set with cable fixing for ORTLIEB handlebar bags and baskets with wide block. - Ideal for use with e-bike displays - Universal cord attachment - Reflective tape on front - Holder compatible with bags and baskets of other brands - Attention: not suitable for carbon handlebars

Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. Specifications: - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant PU-coated nylon fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

Sturdy and tough for rough conditions. The Sport-Roller Plus made of abrasion-resistant Cordura is designed for lowriders in the front or for the rear rack; it is also the right choice for children's bikes. The handy roll closures are completely waterproof and provide plenty of room for your belongings. With the QL2.1 system fixing to the rack is quick and easy. - Classical pannier (pair) with roll closure - Can be used individually or as pair as small rear pannier or for the lowrider - Abrasion-resistant Cordura fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24 L or 31 L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflectors - Ideal for the use on children's/youth bicycles - Easy to clean inside

Let's be honest. While most bike baskets are practical, they're not especially fashionable, and you can only use them so long as the weather holds because they're not waterproof. That's why it was high time for someone to reinvent the bike basket. The ORTLIEB Up-Town Urban was designed for all of those who prefer to get around town by bike, even if they need to go shopping or run other errands, or simply want something on hand for spontaneous purchases. Want to ride off in the morning without knowing what the day has in store for you? Make sure to take your Up-Town along. Easy to attach to your handlebar, this versatile bike basket accompanies you without compromising your bike's handling. This is because the Up-Town Urban, with its streamlined profile, scarcely adds to your wind resistance. Moreover, it protects your cargo against wind, dust, and rain – not to mention all those inquisitive looks. And with its distinguished appearance, the waterproof polyurethane-coated Cordura fabric matches every outfit and every occasion. You can open and close the stretch cover without having to remove it entirely. And with a packing volume of 17.5 liters, you'll have plenty of space for all of your stuff. There is also a large, zippered inside pocket for all the things you want to be able to access quickly such as your smartphone, wallet, and keys. FEATURES: - 3 Alternate handlebar mounting sets available - Comfortable, adjustable handle - Flat adapter plate - Basket cover designed for quick access - Form-stable aluminum frame - Reflector made of 3M Scotchlite reflective material - Zippered inside pocket - Tip-resistant quadrapod design

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non-scratch hooks

Bring along the essentials with the Hot Laps 1L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. - Breathable air mesh back panel - Deployable side water bottle pocket - Internal organization - Padded, fleece-lined phone sleeve - External attachment straps

Bring along the essentials with the Hot Laps 2L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. We bet you'll agree that there's nothing like the freedom of the sleek and functional Hot Laps 2L Lumbar Pack. - Breathable air mesh back panel - Two deployable side water bottle pockets - Internal organization - Padded, fleece-lined, zippered phone pocket - External attachment straps

Compact on-bike storage for tools and flat repair. Now updated with an oversized 30mm strap that reduces shifting during rides, the Hot Laps Gripper Bag's minimalist design stows easily almost anywhere on your bike. It's ideal for carrying essentials on a quick ride or in tandem with our larger packs on longer rides, moving weight off your back and freeing up valuable space for water and food. Keep the Gripper on your bike, and your chances of walking out of the woods are forever minimized. - On-bike storage solution - Fits spare tube, tire levers, CO2, etc. (sold separately) - Attaches under seat or at multiple locations on bike frame

E-Cargo Accessories Designed for ultimate flexibility and functionality, the Pannier Bag is three bags in one, and has smart details to make it easy to live with. Highlights: - Large main compartment that includes two smaller shopping totes designed for a perfect fit inside - Ambidextrous design for left-side or right-side loading - Collapsible for a narrower profile when not in use - Water-resistant, tear-resistant, dirt-resistant 1680D recycled PET fabric exterior - Hi-viz orange 200D ripstop nylon interior lining - 180-degree reflective elements for enhanced visibility on either side of bike

- Material: water-resistant nylon - Mount: saddle/seatpost - Pockets: 1 internal - Closure: zip

Pack it up. - Contain QR saddle bags offer simple and effective solutions to keep your essentials stored securely and easy to access. Where it thrives - On the bike, out in the elements What it's built for - Convenience, durability Highlights - Quick-Release T-Bracket twists and locks onto saddle rails - Waterproof nylon construction and zippers - Rubberized fabric with a light clip/strap